2018 Landoll Detachable Trailers 845E-53HD-AG-S60

2018 Landoll Detachable Trailers 845E-53HD-AG-S60

Haul More with Landoll Hauloll Detachable

The new 845E-AG Hauloll is designed to move today and tomorrows heaviest equipment. The 845E-HD-AGs 45-ton capacity is matched to handle even the heaviest of the field-ready tractors and choppers in production today. The heavy haul requirement was carefully considered during the product development of the 845E-AG resulting in a trailer that comes standard with a Heavy Duty Gooseneck with provisions for a 36 Flip extension.

Built For the Heavy Haul Ag, Construction, Forklifts and More

The 845E-HD-AG capacity comes in at 45 tons (90,000 lbs within 16 and 80,000 lbs. within 12) and a 19-1/4 loaded deck height keeps the center of gravity lower than most detachable trailers. This trailer is built with Heavy Haul aluminum pullouts that are 30% stronger than the 835 pullouts and extend out to 13 wide on 6 increments. Pulled out to the proper width and planked, these over widths are designed to handle big wheel loader and some track equipment. Enlarged lift cylinders with a 150,000 lb. lift capacity and gooseneck flip brackets for 36 flip overextension round out the heavy haul features on the 845E-HD-AG. The heavy haul load carrier allows the driver to match the needed ground clearance in one of the 7-ride height positions to choose from.

Raising the Bar on Gvwr

Most 2 axle base trailers run out of GVWR to legally permit many heavier loads. The Landoll 845E HD AG tops out at 116,500 lbs. / 51,076 KG GVWR allowing for a full 90,000 lbs. of payload. The trailer equipped with the gooseneck extension and the third flip axle will scale even the toughest AG tractors. Now as always each state DOT will control the exact weighs you can transport on their individual highways.

Regen-Hoss Hydraulics

Not only is the 845E-HD-AG built for heavy haul Ag, it comes standard with REGEN-HOSS hydraulics, the new hydraulic -regeneration valve system with Rexroth valve rated at 2500 PSI and 20GPM. That is a significant increase in hydraulic speed, decreasing the amount of time it takes to load equipment.

Features may include:

FRAME and FEATURES:

• Capacity: 45 Tons (90,000 lbs.)

• Dual Deck Rating:

• 90,000 lbs. in 16.

• 80,00 lbs in 12'

• Estimated Base Weight: 21,800 lbs. (845-48HD) +/- 3%

• Main Frame: Fabricated 13" Beam, 100,000 PSI Yield Flanges

• Deck Width: 102"

• Loaded Deck Height: 19-1/4"

• Loaded Ground Clearance: 7"

• Decking: 1-1/2" Nominal, Apitong Full Width

• Crossmembers: 8" x 3" Rect Tube on 18" Centers

• Hitch: Patented Automatic Gooseneck Lock Engagement

• Gooseneck: 12' Heavy Duty (Includes Flip Brackets)

• Pin Setting: 15"

• Swing Clearance: 84"

• Side Extension: 27" Aluminum Telescoping Side Extensions (Lower Deck) (Capacity 9,000 lbs. each)

Accessories: 845E-HD-AG 48' and 53' Frame Prepared with Flip Bkts, Electric, and Air for 3rd Axle Flip, Includes Frame Prep in Rear Trunnion Bumper for Hyd Flip Option. 845E-53HD AG S60 Has No Provision for a Flip Axle.

• Tool Box: None Standard

• Gooseneck Tie Downs: D-Rings: (2) Each at Front Corner; (2) Each at Back

• Lower Deck Tie Downs: Side Mounted D-Rings on 36" Centers

• Rear Trunnion Tie Downs: D-Rings: (2) Each at Base Flush Mounted on Top of Inner Beams; (2) Each Web Mounted on Top; (2) Each Rear Flush Mounted on Top of Inner Beams; (2) Each Top of Slope (Outer Web)

SUSPENSION and UNDERCARRIAGE:

• Suspension: Neway Air Ride, 25,000 lb. Capacity

• Grease: Centralized Grease System