2017 Shelbourne Reynolds Powerspread Pro (LWB)

2017 Shelbourne Reynols Powerspread Pro (LWB)

The Powerspread Pro range consists of two models the 2400 gallon machine and the 3200 gallon model. The Pro 3200 has a capacity of about 15 tonnes in solid manure the concept behind its development being to boost capacity and increase discharge rate to bring it in line with the output expected from similarly sized rear discharge spreaders.

While the Pro 3200 is aimed primarily at the contractor and large scale livestock farmer, the more conservative Powerspread 2400 has a capacity of about 11 tonnes and is ideally suited for use by more average size livestock units.

Both models employ a large diameter horizontal auger to convey material to the centrally positioned rotor which then powers it out to the right of the machine to create an even, 20m wide spread pattern. The use of more vertical rather than sloping sides used in previous models, along with an agitator unit eliminates any tendency for material to bridge above the auger as the spreader empties.

The rotor, which turns at 750rpm, has an upward rotation and uses the specially strengthened edge of the exit door as a shear bar; material is reduced in size as it leaves the machine and creates an even spread pattern. The door itself has a hydraulically operated slide so that application rates can be controlled from the tractor cab.

Both the Pro 3200 and 2400 models require very little power to operate the brunt of the power being required to handle the weight of the fully loaded spreaders. As such, Shelbourne Reynolds recommends a minimum of 120hp for the larger spreader.

Running gear comprises 650/65 R 30.5 Trelleborg flotation tyres on a single axle with an option for tandem axles. Options extend to air brakes rather than hydraulic brakes and, for those needing to know precise application rates, weigh cells can be fitted if specified.