2017 Schlagel Till-N-Plant Series 2B" Strip Till Machin

2017 Schlagel Till-N-Plant Series 2B" Strip Till Machin

We reworked some areas of the unit and now believe we have the best row unit we have ever had! They are even tougher than the previous unit and easily adjustable to get the job done the way you want it to be done. The unit's down-pressure is adjusted by moving one rod. The front flat coulter depth is adjusted with one bolt. The wavy coulters and rear packer are adjusted by moving a pin.

The row unit starts with a flat coulter to cut the residue ahead of the 3/4" thick parabolic shank. The unit can be adjusted so the shank tills from 6 to 16 inches deep. The parabolic shank and point are designed to prevent soil from slabbing up in big chunks. Following the shanks, we use two wavy coulters to lift and pinch the soil together.

This closes the void left by the shank, removing any air pockets in the seed bed. The final key component of the row unit is its dual-wheel packer. This packer acts as a "depth gauge wheel" for the whole row unit. This firms the soil to lessen moisture evaporation and also breaks up any dirt clods that can impede seed placement and seed-to-soil contact. A hydraulic reset is available in place of the standard shear bolt, this automaticly resets the shank after it clears an obstruction without the operator .

• Three-Point Machines with Solid Toolbar: (4 Row 30")(6 Row 22", 30", and 36")(8 Row 22", 30", and 36")(12 Row 22", 24", and 30")
  • Three-Point Machines with 157 degree Folding Wing Toolbars: (8 Row 30")(12 Row 22" and 30")
  • Planter Caddy Style Machines With Solid Toolbar: (4 Row 30")(6 Row 30")(8 Row 30")(12 Row 30")
  • Planter Caddy Style Machines With 157 degree Folding Wing Toolbars: (8 Row 30")(12 Row 22", 30" and 36")(16 Row 30")