2018 Pottinger EUROPROFI COMBILINE 2 in 1 loader 5510 D Combiline

2018 Pottinger EUROPROFI COMBILINE 2 in 1 loader 5510 D Combiline

Depending on the type of tractor and the tyres fitted, a turning angle of up to 60 is possible thanks to the narrow design of the drawbar.

The drawbar is implemented as standard as a hinged drawbar with two doubleacting cylinders.

• All hoses and cables are routed tidily through the hose holder.

• A folding support leg makes it easy to attach and detach.

• Load-Sensing system is also available.

The frame components are constructed using high quality QSTE fine-grained steel. Frame and side pillars are fastened using finely threaded bolts no welds. Closely-spaced pillars and high-strength side profiles ensure the highest strength.

• Width inside loading chamber 2.10 m.

• Tailgate opening angle adjusted as required from the tractor seat.

• Access ladder and side door standard on D models.

They are driven by a wide-angle PTO shaft and a cam-type clutch to protect the driveline. The large-dimensioned rotor transmission is submerged in grease.

• The bearing is located on the rotor frame between the rotor and transmission to protect the bearings and transmission.

• The driveline is protected at 1800 Nm, corresponding to a peak tractor power of 162 kW / 220 hp.

• This represents an increase in performance of 20 %.