2019 McHale Fixed Chamber Round Balers F5400

2019 McHale Fixed Chamber Round Balers F5400

The McHale F5400 non-chopper round baler features a star shaped feed rotor to quickly and efficiently move the crop from the pick up into the bale chamber. This maximizes the baler performance and throughput.

The F5400 non chopper round baler comes standard with the McHale Drop Floor Unblocking System, 50mm Bearings on the bale chamber, heavy-duty chains and a continuous oiling system.

Features may include:

• On the McHale F5400 Non Chopper Round Baler, the left hand side of the gearbox drives the rollers in the bale chamber, while the pick up and feed rotor are driven from the right hand side of the machine. This system ensures direct short transfer paths and optimal power distribution.

• The McHale F5400 non-chopper round baler is equipped with a 2.1 metre galvanised pick up that lifts even the shortest of crop. Accurate height control can be achieved through a spring balanced hydraulic lifting system. The F5400 non chopper baler comes standard with pneumatic guide wheels, which contact the ground on exactly the same line as the tines and guide the pick up perfectly over uneven ground.

• The star shaped feed rotor fitted behind the pick up on the F5400 round baler ensures a high capacity flow of grass into the bale chamber. As crop enters the rotor, rotating tines feed the crop through to the bale chamber. The tines on the rotor ensure high output while the star layout reduces the load peaks as the F5400 round baler works in heavy swarths.

• The McHale F5400 non chopper round baler is designed to achieve maximum output, however as baling conditions are not always ideal, uneven swarths can occur, which can lead to blockages. The main drive chain is protected by a slip clutch on the PTO.

• The roller ends are fitted with a McHale-designed reverse thread sealing system. This system protects the bearings; when the roller moves in one direction the thread on the seal moves in the opposite direction. This ensures that any material which tries to get into the back of the rollers is automatically threaded out.

• The main drive chains on the F5400 round baler can continuously receive oil. The Chamber chains, rotor chain, pick up chains and pick up cam track are oiled continuously from the oil pump, which is driven off the gearbox.

• The F5400 is equipped with a Wizard control box containing all the functionality required to operate the machine. The control box displays job and machine totals, a net feed and delay functions and also has a lube count alarm to remind the operator to check the oil levels and to grease the machine.