2017 Maschio Gaspardo C 205

2017 Maschio Gaspardo C 205

The model C rotary tiller is an implement with a wide variety of uses, suitable for medium/large farms and medium power tractors.

The preparation of the ground after plowing, the working in of stubble and crop residues, the mechanical control of weeds, the breaking up of established grassland, direct preparation without plowing - these are only some of its many possible uses.

Working speed could be easily set by changing the gears inside the PTO gearbox. The user may select the most suitable rotor rpm according to soil conditions.

3 heavy duty gear drives running in a sealed oil unit to give constant lubrication during work and to ensure high performance even in prolonged and hard soil tillage.

The levelling bonnet comes as standard complete with a sprung mechanical rod that puts constant downward pressure on the bonnet and acts as a shock absorber protecting the bonnet from damage, whist working in stony conditions. The springs on the pressure rod that is connected to the rear levelling bonnet increase the machine stability at work.

The rear rollers are characterized by a greater width than the rotor allowing a perfect seedbed levelling.

The new Duo-Cone sealing system guarantees reliability without the need for maintenance. You can achieve at least 50% longer life from the Duo-Cone system than standard sealing systems in the most demanding working environments.

The sealing system is completely waterproof or amphibious allowing the rotor and bearing to run in its own oil supply, this allows the rotor to work and be reliable in the dustiest of environments or even work immersed in water and yet the seals will still prevent water and dust ingress into the rotor and hubs.

• 540/1000 rpm PTO gearbox

• Rotor revolutions 540 rpm PTO (4s): 175-214-262-143

• Rotor revolutions 1000 rpm PTO (2s): 324-356

• PTO shaft with slip clutch (1" 3/8 Z6 tractor side yoke)

• Side gear drive in oil bath

• Universal three point hitch, cat. II^

• Offset front bar hitches

• 6 blades per flange (side blades are always mounted inwards)

• Bonnet spring adjusters

• Pair of skids

• "Duo cone" waterproof sealings, oil bath lubrication

• CE safety guards

• Side blades mounted outwards available upon request