2017 Maschio Gaspardo Campo P 22

2017 Maschio Gaspardo CAMPO P 22

Pompeo was designed to satisfy all with many configurations. Its main strength is the powerful parallelogram lifter with 1500 mm of range, dampened by a nitrogen accumulator system. With this configuration is possible to match the machine to wider booms in the range, up to 36 m. The sprayer is a top range machine and can be featured to different levels: pressure control unit is available from manual version to ISOBUS computer. The air sleeve can be installed on demand on both 2200 or 3200 litres tanks, maximum working width of it is 28 m.

ALA 700 features bigger sprayers as large as 32 m of working width. Last section folds sideward with no risk of accident involving high tension cables. Boom is featured with hydraulic lock of stabilizer, tilt corrector, independent geometry, tri-jet nozzles and 1400 mm hydraulic lifting. Hydro-pneumatic dampening is installed on cylinders of parallelogram.

ALA 600 is the boom with side folding of last section, available in working widths up to 24 m: this particular configuration prevents any possible accident from hitting high tension lines. Boom is featured with hydraulic lock of stabilizer, tilt corrector, independent geometry, tri-jet nozzles and 1400 mm hydraulic lifting.

Model with working widths between 15 and 22 m, last section of the arms folds upwards allowing to easily overcome side obstacles. Boom is featured with hydraulic lock of stabilizer, tilt corrector, independent geometry, tri-jet nozzles and hydraulic lifting.

The control panel groups all the functions of the machine: all levers and main controls are clustered on the left side with clear indication for suction and delivery valves. Pre-mixer and hand-washing tap are very close to main panel to ease any operation in preparing treatment.

Pressure control units are available on 3 levels: manual, electrical or computer assisted (see table pag 23). Mechanical ones have a remote general switch to control the ON/OFF function from the drivers seat. Machines with the electric pressure adjuster have a set of electro-valves to control all the booms movements from a console installed in the cab; with this solution a single double effect oil fast plug is required.

To spray uniformly chemicals is a primary issue to keep the boom stable and always parallel to the soil. The stabilizer device has a key role in matching this target, specially when operating at high speed. On trailed machine booms are hanged to single-hinge or parallelogram devices between boom and frame connection. Oscillation is reduced by gas-pistons or return-springs.

All Booms for SIRIO and POMPEO can be provided of an hydro-pneumatic dampener with nitrogen accumulator to reduce at the best bouncing from working on uneven soils.

• Tri-jet nozzles

• PTO shaft

• Centralized control panel

• Agitation circuit

• Clear water tank

• hand washing tank

• Inner tank 360 spinning nozzle

• DEVIOKIT

• Hydro-pneumatic boom dampener

• Pre-mixer

• Versions with manual control, electric o computer managed

• 270/95-R44 tyres