2017 Maschio Gaspardo CAMPO C 22

2017 Maschio Gaspardo CAMPO C 22

CAMPO C is ideal for farmers with small fields looking for good autonomy and compact design of vertical boom lifting. Among the 4 models of the series, the smallest has a tank of only 1500 litres: this is an optimal feature to spread the weight of tractor and sprayer on 3 axles, reducing in this way soil compaction. This solution was studied specifically for horticultural growers, always careful to soil health.

All models have a compact vertical hydraulic lift system: lifting range is 1000 mm in smaller machines, 1400 mm on 2200 and 3200 tanks. A nitrogen accumulator is connected to the lifting cylinder to guarantee boom dampening. CAMPO C is available in different version with manual, electric or computer assisted (standard or ISOBUS) pressure control unit. Air sleeve can be installed when the sprayer is featured with ALA 500 or 600 boom.

ALA 600 is the boom with side folding of last section, available in working widths up to 24 m: this particular configuration prevents any possible accident from hitting high tension lines. Boom is featured with hydraulic lock of stabilizer, tilt corrector, independent geometry, tri-jet nozzles and 1400 mm hydraulic lifting.

Model with working widths between 15 and 22 m, last section of the arms folds upwards allowing to easily overcome side obstacles. Boom is featured with hydraulic lock of stabilizer, tilt corrector, independent geometry, tri-jet nozzles and hydraulic lifting.

The basic model from the ALA family: when closed the boom is folded sideward along the main tank; working widths are 16 or 18 m. With second arm section folding upwards is possible to easily overcome side obstacle at the edge of working width. Standard feature includes single-jet nozzles with quick release.

Work U boom is a model with hydraulic folding; during transport closed boom is folded rear vertically. Self-levelling is a standard feature, as the hydraulic 1000 mm lifting (1400 on SATURNO ONE and SIRIO models)

The control panel groups all the functions of the machine: all levers and main controls are clustered on the left side with clear indication for suction and delivery valves. Pre-mixer and hand-washing tap are very close to main panel to ease any operation in preparing treatment.

Pressure control units are available on 3 levels: manual, electrical or computer assisted (see table pag 23). Mechanical ones have a remote general switch to control the ON/OFF function from the drivers seat. Machines with the electric pressure adjuster have a set of electro-valves to control all the booms movements from a console installed in the cab; with this solution a single double effect oil fast plug is required.

• Tri-jet nozzles

• PTO shaft

• Centralized control panel (on 2200 and 3200)

• Foam row marker (only on 1500 and 2000)

• Filling pipe (50 mm) 8 m (only on 1500 and 2000)

• Agitation circuit

• Clear water tank

• hand washing tank

• Inner tank 360 spinning nozzle

• DEVIOKIT

• Hydro-pneumatic boom dampener

• Pre-mixer

• Versions with manual control, electric o computer managed

• 230/95-R36 tyres