2018 Landoll Traveling Axle Trailers 455A-53

2018 Landoll Traveling Axle Trailers 455A-53

The Landoll Trailer Line is taking a huge leap forward with the introduction of the all-new hydraulic operating systems, nicknamed H.O.S.S. and High Visibility Lighting package.

H.O.S.S. cuts the overall operational time in half. The axle traveling forward has increased by 36% and moving back by 58%. Tilt deck positioning has increased to nearly 63%, while winch in and out speeds are closer to 66%. This improvement will allow for more loads to take place.

The Model 455A Traveling Axle trailer will handle heavy loads with triple axles and 55-ton capacity. Lengths available are 48, 50, 53 and California legal 50. To maximize the load capacity, the 455 is standard with a 60 axle spread.

Increased frame capacity is one of the outstanding features of the 455 along with wider main beams, wider undercarriage, wider tilt cylinder mounts and wider outer beam pivot points. Buying a Landoll means you get the total package of super low load angle, ease and safety of operation, superior quality and the highest retained resale value in the market today.

All 400 series trailers feature the super low clearance slope transition allowing man lifts, forklifts, and other difficult low clearance equipment to load easily on the upper deck.</pUltimate Stability

The four beam frame design is the backbone of a super versatile, solid piece of equipment. Wider main beams with a wider undercarriage, outboard tilt cylinder mounts, and outer beam pivot points add superior stability while loading heavy loads.

Landoll is the only trailer manufacturer to offer powder coat paint on an entire trailer frame. The very durable finish provides excellent chemical and salt resistance while giving Landoll trailers a high quality, attractive appearance. A zinc-rich powder primer is applied prior to painting the entire frame with one of eight standard powder coat colors.

Features may include:

• Capacity: 55 Ton (110,000 lbs.)

• Deck Rating: 70,000 lbs. in 10'

• Estimated Base Weight: To Be Updated

• Main Frame: Fabricated 80,000 and 100,000 PSI Yield, 40" Beam Centers

• Crossmembers: 4" Junior I-Beam on 8" Centers

• Pin Setting: 21"

• Swing Clearance: 80"

• Hitch: 5th-Wheel 2" Kingpin

• Width: 102"

• Slope Drop: 90

• Loaded Deck Height: 37"

• Loaded Ground Clearance: 14" at Bottom of Gooseneck

• Decking: 1 3/8" Apitong Hardwood

• Load Angle: 6.5

• Accessories: Flat Approach Plate with 6 Key Hole Tie Downs, Main Deck Center Slope Roller, Forklift Package Standard, 410-48CA & 410-50 have 40' Kingpin to Rear Axle with 9' 11" Axle Spread

• Tie Downs: Double Key Hole Chain Slots with Square Stake Pockets on 16" Centers

• Tool Box: Twin Side Mounted in Upper Deck with Lockable Doors (7H x 34W x 29 D)

• Parking Stands: Jost Two-Speed Landing Gear

• Suspension: Neway Air Ride RLU228, 22,500 lb. Capacity

• Undercarriage: 4" x 100" and 4" x 126"; Accepts After-Market Dock Level Hydraulics System; Powder Coated Black

• Grease: Centralized Grease System

• Axles: (3) 25,000 lb. Axles, Dual Tire, Oil Bath Bearings, Automatic Slack Adjusters