2026 Land Pride AFM4522
Get in Touch
Description
2026 Land Pride AFM4522
Land Pride's AFM4522 All Flex Mower is a commercial mower that can easily mow over 10 acres per hour. Contractors can make quick work of turf areas like parks, sports complexes, and sod farms. The high blade tip speed will produce a quality cut in Bermuda, fescue, or rye turf grasses. The narrow transport width allows access to area with east, easily fitting through any 10-foot gate.
Features May Include:
- Gearbox Warranty
- 2 Year Limited Gearbox Warranty demonstrates our confidence in the gearbox's quality and lasting performance.
- Optional Hydraulic Wing Unlock
- Transport locks can be released easily from the tractor seat while operating the same tractor control lever that raises and lowers the mower decks. (Pull-rope release standard.)
- Narrow Transport Width
- Narrow 9'6" transport width allows unit to be transported with ease.
- Commercial-duty Blade Spindle
- The commercial-duty 1-5/8" blade spindle features a cast iron housing, additional steel plate support, a 3/4" thick blade support bar and a remote greasing line.
- Zero Turn Radius
- Sleek frame design allows operator to make tighter turns without leaving windrows and skips. The AFM virtually becomes a zero turn mower.
Info
Industry
Agriculture
Make
Land Pride
Model
AFM4522
Trim
Base
Year
2026
MSRP
N/A
Category
Mower
Subcategory
General
Specs
Cutting Width
21 ft - 9 in (6.63 m)
Length
18 ft - 6 in (5.64 m) Mowing Position 15'-2" (4.62 m) Transport Position
Width
22 ft - 0 in (6.71 m) | Transport: 9 ft - 6 in (2.9 m) With Lock bar Installed
Blades
Tip Speed: 18,498 F.P.M. (94 mps) | Spindle Speed: 2,241 R.P.M. | Overlap: 2 1/4 in (5.7 cm) | 3 Each Per Deck: Low Lift (5/16 in x 2 1/2 in x 31 17/32 in) Optional Blades: Medium Lift, High Lift & Mulching | Bearing: Sealed Ball Bearings
Height
11 ft - 2 in (3.40 m)
Discharge
Rear
Weight
4,150 lbs. (1882.4 kg)
Power/Horsepower
Minimum: 65 (48.5 kW) Maximum: 100 (74.6 kW)
Notes
Signal lights 7 Pin connector: LED SAE J560 pin configuration | Mowing Capacity: @ 2 mph (3.2km/h) @ 4 mph (6.4km/h) @ 6 mph (9.7km/h) 5.27 Acres (2.1 hectare) Per Hour 10.54 Acres (4.3 hectare) Per Hour 15.82 Acres (6.4 hectare) Per Hour | Hydraulic Outlets: 1 Set Required | Center Deck Flex: 10 Degrees Left To Right 22 Degrees Front To Back | Wing Flex: 23 Degrees Left To Right 22 Degrees Front To Back | Transport Locks: Automatic with Pull Rope Release | Drive Belt Tension: Spring Loaded Idler with Overcenter Release | Blade Drive Belt: 1 C-Section | Anti-Scalp Roller: Front Center of Each Deck | Deck Thickness: 3/16 in (5 mm) | Deck Overlap: 4 1/2 in (11.4 cm) | Deck Size & Quantity: 3 each @ 90" (1.52m) | Deck Drivelines: (3) Category III with Slip Clutch | Main Driveline (1): Category lV with Constant Velocity | Gearboxes: 540 rpm (1)-Splitter & (3)-Wing | Gearbox Support: 1/4 in (6 mm) Steel Channel | Tongue Support: 2,200 lb. (997.9 kg) Capacity Screw Jack | Hitch: Pull Type with Adjustable Clevis and Safety Tow Chain
Oil Capacity
Gearbox: Splitter: 2.5 pints (1.18 L) Wings: 3.5 pints (1.66 L)
Cutting Height
3/4 in to 5 1/4 in (19 mm to 133 mm) In 1/4" (6 mm) increments
Tires
Transport: 2 each, P27560SR | Deck: 18 x 9.5 Air Tire, Sealant
Wheels
Gauge Wheel Arms: 1/4 in (6 mm) Wall Square Tubing | Deck Wheel Spindles: 1 1/4 in w/Nylon Bushings
Cylinders
Deck: Dual Actin
Turning Radius
Zero Turning Radius
