2026 Land Pride AFM4214
Get in Touch
Description
2026 Land Pride AFM4214
The Land Pride AFM4214 All Flex Grooming Mower provides users with an excellent cut quality on groomed areas such as sports fields, theme parks, fairways, turf farms, and large estates. They can be ordered with slip-clutch or conventional wing driveline configurations. The mower offers independent deck flotation and zero turning radius thanks to the sleek frame design. The contour-following capability, highly productive cutting widths, and rear discharge design of the floating cutting decks will greatly reduce wide-area cutting times and still deliver beautifully groomed surfaces at mowing speeds up to 6 mph.
Features May Include:
- Gearbox Warranty
- 5 Year Limited Gearbox Warranty demonstrates our confidence in the gearbox's quality and lasting performance.
- Optional Hydraulic Wing Unlock
- Transport locks can be released easily from the tractor seat while operating the same tractor control lever that raises and lowers the mower decks. (Pull-rope release standard.)
- Transport Tires
- 23" Large transport tires offer smooth roading and less grass compaction.
- Zero Turn Radius
- Sleek frame design allows operator to make tighter turns without leaving windrows and skips. The AFM virtually becomes a zero turn mower.
- Over Center Release
- Over center release easily takes tension off the drive belts during extended off time, or for belt replacement.
- Low Deck Pivot
- Low deck pivot allows for greater side to side flotation on the wing decks.
- Anti-Scalp Rollers
- Anti-scalp rollers on nose and trailing edges of decks protect the deck as well as the turf.
Info
Industry
Agriculture
Make
Land Pride
Model
AFM4214
Trim
Base
Year
2026
MSRP
N/A
Category
Mower
Subcategory
General
Specs
Cutting Width
14 ft - 0 in
Cutting Height
3/4 in to 5 1/4 in (In 1/4 in increments)
Width
14 ft - 3 in | Transport: 6 ft - 8 in
Length
14 ft - 10 in Mowing Position 12 ft - 11 in Transport Position
Discharge
Type: Rear
Height
Transport: 7 ft - 7 1/2 in
Weight
Machine: W/15 in tires = 3,000 lbs. W/18 in tires = 3,150 lbs.
Power/Horsepower
Minimum 40 HP / Maximum 70 HP
Notes
Drive Belt Tension: Spring Loaded Idler with Overcenter Release | Mowing Capacity : @ 2 mph = 3.39 Acres Per Hour @ 4 mph = 6.78 Acres Per Hour @ 6 mph = 10.17 Acres Per Hour | Wing Deck Flex: 23 Degrees Left To Right 22 Degrees Front To Back | Center Deck Flex: 10 Degrees Left To Right 22 Degrees Front To Back | Hydraulic Outlets: 1 Set Required | Deck Thickness: 3/16 in | Deck Overlap 6 in | Deck Size & Quantity: 3 each / 60 in | Deck Drivelines (3): Cat. II | Main Driveline: (1) Cat. lV Constant Velocity with Slip Clutch | Anti-Scalp Roller: Front Center and Outside Deck Corners | Gearbox Lubrication: Gear Lube 80-90W EP | Gearboxes: 540 RPM (1)-Splitter & (3)-Wing | Gearbox Support 3/8: Steel Channel | Tongue Support: 2,200 lb. Capacity Screw Jack | Hitch: Pull Type with Adjustable Clevis and Safety Tow Chain
Oil Type
Oil Capacity
Gearbox: 3 - Wings: 3.5 Pints SD Splitter: 2.125 Pints or OMNI Splitter: 2.5 Pints
Cylinders
Deck: Dual Acting
Wheels
Deck Wheel Spindles: 1 1/4 in w/Nylon Bushings | Gauge Wheel Arms: 1/4 in Wall Square Tubing
Turning Radius
Zero Turning Radius
Tires
Deck: 10 each, Air tires with Sealant 18 x 9.5 or 15 x 6.6 | Transport: 2 each, 23 x 10.5 with Sealant
Brakes
Deck:
Blades
Drive Belt: 1 B-Section | Overlap: 1 1/4 in | 3 Each Per Deck: Low Lift (5/16" x 2 1/2" x 20 29/32") Optional Blades: Medium Lift, High Lift & Mulching | Tip Speed: 18,396 F.P.M. | Spindle Speed: 3,362 R.P.M.