Share

2026 Land Pride FMPM2760 

Call or Click for Quote

(336) 349-3336

Apply for financing

Get Quote

 Schedule a Test Drive Value your Trade Ask Us Anything

Get in Touch

    Description

    2026 Land Pride FMPM2760

    Land Pride’s familiar Parallel Arm Mower received a makeover and has been outfitted with a new mowing head. The FMP27 & FMP37 feature the parallel arm from our popular RCP27 & RCP37 with a Flail Head in place of the Rotary Cutter. The FMP is a good tool for mowing around ponds, over guardrails, or below grade while keeping the tractor on level ground and is easily attached and detached from the tractor’s Cat. 2 or 3 3-point hitch, freeing up the tractor for other uses. Contractors, municipalities, and landowners alike will benefit from the versatility of this unit!

    Features May Include:

    • Inline Filter
      • Cleans hydraulic fluid before it re-enters the reservoir.
    • Two Parking Stands
      • Easy and level storage, easy connecting to tractor.
    • Oil Pressure Gauge
      • Easily monitor oil pressure for optimum performance of unit.
    • 40 Gallon Oil Reservoir
      • Large reservoir maintains optimum fluid temperatures and also serves as counterweight.
    • Hammer Blades
      • 2" Cutting capacity with hammer blades is ideal for trimming brush.
    • Independent control option
      • Self contained hydraulic system eliminates the tractor/FMP hydraulic incompatibility. This option uses the FMP hydraulic system to operate the mower.
    • 11'1" Transport Width
      • Folds up close to the tractor. No weight brackets or decks hanging away from the tractor. Typically, not much wider than the tractor, which means safer transporting.

    Info

    Industry

    Agriculture

    Make

    Land Pride

    Model

    FMPM2760

    Trim

    Base

    Year

    2026

    MSRP

    N/A

    Category

    Attachments

    Subcategory

    Mower

    Specs

    Weight

    3,290 lbs | Minimum Base Tractor: 8,000 lbs. (3629 kg)

    Width

    21 in (6.43 m) | Transport: 11 ft - 1 in (3.38 m)

    Cutting Width

    60 in

    Notes

    Reservoir Capacity and Filter: 40 Gallons (151 liters) / Conventional 10 Micron Filter | Hydraulic Fluid Flow Rate: Approximately 15 gpm or 56.8 L/min | Overload Protection: Hydraulic relief valve | Breakaway Protection: Hydraulic Cylinder | Hitch: 3-Point Cat. 2 & 3 with clevis style lower hitch, Quick Hitch adaptable except with M126GX, M135GX, or M6-141 Kubota tractors | Speed Increaser Fluid: 80-90W EP Gearlube | Speed Increaser Fluid Capacity: 1 Pint (.47 L) | Deck Thickness: 10 GA (3.4 mm) | Deck Rotating Arc: 180 Degrees | Deck Motor rpm at Power Take-Off Speed: | Power Take-Off Input Speed: 540 or 1000 rpm

    Power/Horsepower

    Minimum: 75 hp (55.9 kW) |

    Blades

    Tip Speed: 9,250 fpm (47 mps) | Tip Speed: 9,250 fpm (47 mps)

    Height

    Adjustment: Rear roller adjustable