2026 Land Pride RTR2072





Get in Touch
Description
2026 Land Pride RTR2072
The Land Pride RTR2072 Rotary Tiller is just right for home gardening, landscape work, vegetable farming, food plot maintenance, and light commercial use. The RTR2072 features a reverse tilling action for tough conditions and turns up hard packed ground, leaving a perfect seedbed for gardens and grass. The reverse action "sucks" the tiller into the ground, which prohibits the tiller from "walking" on hard ground. It also incorporates spring loaded "sifting" rods behind the tines to help bury large rocks and debris. The reverse action of the rotor brings material up and over the top. Rocks and vegetation cannot get through the sifting rods so they fall first. Soil continues to get sifted before it falls, building a layer of large to small dirt clods burying the rocks and vegetation.
Features May Include:
- Quick-Hitch Compatible
- Our Quick-Hitch System allows you to quickly connect and disconnect from the implement - most without leaving the tractor seat. This is a real time saver when working on multiple projects.
- Gearbox Warranty
- 5 Year Limited Gearbox Warranty demonstrates our confidence in the gearbox's quality and lasting performance.
- Reverse Tilling
- Reverse action ‘sucks’ the tiller into the ground, and does not walk on top of hard ground like forward rotation tillers can.
- Stamped Chain Case
- Stamped forming gives the chain cover strength.
- Gearbox
- Cast iron gearbox provides durability.
- Six Tines
- Six tines cut through the ground smoother. "C" shaped tines require less horsepower.
Info
Industry
Agriculture
Make
Land Pride
Model
RTR2072
Trim
Base
Year
2026
MSRP
N/A
Category
Attachment / Implement
Subcategory
Tillers
Specs
Weight
795 lbs (361 kgs)
Width
Tilling: 72 in (1.83 m) | Overall: 77 7/8" (1.98 m) 3-Point hitchtType Category I, Adjustabl
Power/Horsepower
23-75 hp (17-56 kW)
Notes
Rotor shaft speed: 220 rpm at 540 rpm power take-off spee | Rotor swing diameter: 17 in (43.2cm) | Rotary bearing mounts: Machined Cast Iron | Sprockets: Splined Bores | Chaincase Lubrication capacity: 32 oz (0,95 L) | Chaincase Lubrication type: Shell Gadus S2 V2200 00 flowable grease or equivalent | Drive Chain: #80 Roller chain - Fully enclosed in oil bath with drain & fill plugs | Gearbox Lubrication capacity: 2.2 Pints (1.04 L) | Gearbox Lubrication type: SAE80-90W EP oil | Gearbox: 75 hp (56 kW) Input at 540 rpm 1.46:1 Ratio Cast Iron Housing, Straight Bevel Gears | Driveline: ASAE Category III Heavy Duty Off-Center Shear bolt - standard Slip Clutch - optional | Rear deflector: Adjustable profile stamped rear deflector | Storage stands: Adjustable | Skid shoes: Adjustable | Tine construction: Alloy steel heat treated “C” shaped blades | Number of tines per flange: 6 | Number of flanges: 9 | Sideshift capabilities: 18 in (45.7 cm)