2026 Land Pride DH3510
Get in Touch
Description
2026 Land Pride DH3510
Land Pride's DH35 Series pull-type Disc Harrows are perfectly matched for seed bed preparation, soil pulverization, and tillage on smaller farms, ranches, construction sites, race tracks, rodeo grounds, nurseries, reclamation sites, and sod farms. Economy-conscious customers will find them more than equal to just about any soil cultivation task you can throw at them.
Features May Include:
- Heavy-duty Bearing Hangers
- Heavy-duty hangers resist the high torque from U-bolts and keep the discs out of the ground.
- Optional Disc Scrapers
- Disc scrapers are available to reduce build-up on discs.
- Smooth or Notched Discs
- 22" Notched front discs or choose from 20" or 22" notched or smooth rear discs for the configuration that's just right for your tillage task.
- Easy Adjustments
- Easily adjust the front and rear gangs to 5 positions for less or more aggressive tilling with a single pin release and lock.
- Transport Tires
- Large transport tires (with the option of adding two more) provide capability for road and field transport over tough surface conditions.
- Optional Furrow Filler Blades
- 18" or 20" Optional furrow filler blades provide more uniform finish on multiple pass applications.
Info
Industry
Agriculture
Make
Land Pride
Model
DH3510
Trim
Base
Year
2026
MSRP
N/A
Category
Attachment / Implement
Subcategory
Disc Bedders/Harrows
Specs
Weight
2,491 lbs (1130 kg) | Tongue: 179 lbs (81 kg)
Cutting Width
10 ft - 6 in
Power/Horsepower
45-100 (33-75)
Notes
Transport tires & rims: Two 9.5L x 15 tires mounted on 15 in x 6 in 5-bolt rims | Hydraulic cylinder for depth/lift control: 3 in x 8 in Hydraulic cylinder with hoses and fittings | Depth control: Cylinder stroke control spacers | Front to rear leveling system: Manual crank adjustment | Gang axle construction: 1 1/8 in Square hi-strength steel | Gang swing arm: 4 x 3 x 1/4 | Center gang beam construction: 4 x 3 x 1/4 | Center gang beam construction: | Mainframe front tube: 5 x 3 x 1/4 | Side mainframe construction: 3 x 4 x 3/16 in | Rear gang angle adjustment: Single pin adjustment to 12, 13 1/2, 15, 16 1/2, or 18 degrees | Forward gang angle adjustment: Single pin adjustment to 15, 16 1/2, 18, 19 1/2, or 21 degrees | Number of bearings: 12 For all ten foot disc configurations | Disc bearing type: Greasable & triple lip sealed ball bearings | Disc blade spacing: 7.5 or 9 (19 or 23) | Approx weight load on each blade with 9" (23 cm) blade spacing: 87 to 93 lbs (40 to 42) | Approx weight load on each blade with 7.5" (19 cm) blade spacing: 79 to 84 (36 to 38) | Hitch frame construction: 3 x 3 x 1/4 (7.6 x 7.6 x 0.6) Wall tubing w/hose carrier and park jack mount | Hitch type: Pull-type w/clevis & hole for 1 1/4 (3.2) pin |
Width
Mainframe: 93 in (2.36 m) | Max. cultivation: 10 ft - 6 in (3.2) Approx. | Transport: 10 ft -10 in (3.3) Base unit
Blades
Disc blade sizes and types: 20 or 22 (51 or 56) Notched or smooth
