Share

2026 Land Pride BB2572 

Call or Click for Quote

(336) 349-3336

Apply for financing

Get Quote

 Schedule a Test Drive Value your Trade Ask Us Anything

Get in Touch

    Description

    2026 Land Pride BB2572

    Land Pride's BB25 Series Fixed Bar Box Scrapers are ideal for building sites, feedlots, outdoor arenas, and on farm and ranch lanes or roadways. Two welded braces extending from front to rear of bucket plus welded gussets between the side panels and moldboard provide exceptional strength for keeping the Box Scraper square under heavy loads. Dirt rolls off of the roll-formed moldboard while scraping, creating less drag and you will get twice the wear on the cutting edge due to its reversability.

    Features May Include:

    • Quick-Hitch Compatible
      • Our Quick-Hitch System allows you to quickly connect and disconnect from the implement - most without leaving the tractor seat. This is a real time saver when working on multiple projects.

    Info

    Industry

    Agriculture

    Make

    Land Pride

    Model

    BB2572

    Trim

    Base

    Year

    2026

    MSRP

    N/A

    Category

    Attachment / Implement

    Subcategory

    Box Blades/Scrapers

    Specs

    Width

    Working: 72 in (1.83 m)

    Weight

    549 lbs (249.0 kg)

    Blades

    Cutting: 2 ea. 1/2 in x 6 in (1.3 cm x 15.2 cm) high carbon, heat treated cutting edges; reversible and replaceable | 2 ea. 1/2 in x 6" (1.3 cm x 15.2 cm) high carbon, heat treated cutting edges; reversible and replaceable

    Notes

    Vertical Shank Positions: 4 | 3-Point Hitch Type: Double strap lower hitches Cat. I (Fits Land Pride Quick Hitch) | A-Frame Material: 1/2 in x 9 in (1.3 cm x 22.9 cm) A36 Flat Bar | Bucket Reinforcement: Two Welded Braces to Rear of Bucket Gusset Between Side Panel and Moldboard | Depth of Bucket: 22 in (55.9 cm) | Side Panels: 3/8 in (10 mm) thick x 16 in (40.6 cm) high x 24 in (61.0 cm) deep | Moldboard: Roll-Formed Moldboard - 17 in (43.2 cm) High | Lift Mechanism: Manual lift with shank pin and hairpin cotter at each shank | Shank Beam: 4 in x 4 in x 5/16 in (10.2 cm x 10.2 cm x 8 mm) Square tubing with 5/16 in x 1 in (8 mm x 25 mm) full length shank reinforcements | Shank Tip Construction: Replaceable heat treated dimpled-on tips | Vertical Shank Positions: 4- positions (2 1/4 in & 1/4 in (57 mm & 6 mm) above and 1 3/4 in & 3 3/4 in (4.4 cm & 9.5 cm) below scraper end plates) | Shank Material: 3/4 in x 2 9/16 in x 18 in (1.9 cm x 6.5 cm x 45.7 cm) Heat Treated Spring Steel | Capacity: 14.7 cu. ft. (0.42 cu m) | Number of Shanks: 7

    Power/Horsepower

    55 horsepower (41.0 kw