2018 Kverneland Centre Mounted Mower Condtioners 3228 MN

2018 Kverneland Centre Mounted Mower Condtioners 3228 MN

Kverneland offers four centre mounted mower conditioners, 3224 MN, 3228 MN, 3228 MR and 3232 MN, in working widths between 2.40 and 3.16m. The nylon tines fitted to the MT models keeps the total weight of the machine to a minimum, while maintaining an aggressive conditioning. Whereas the 3228 MR is ideal for gentle handling of delicate crop.

This feature provides easy and simple setting of the ground pressure. For greater operator comfort, ground pressure of the large suspension spring is set hydraulically from the tractor cab. On the hydraulic version the tension on the large suspension spring, which controls the ground pressure, is adjusted hydraulically, to increase or lower pressure. The chosen ground pressure level is conveniently registered from the easy-to-read scale

Features may include:

• Centre Mounted Spring Suspension

• Available with hydraulic spring adjustment.

• 2.40, 2.81 and 3.16m working width

• Nylon Tine or Roller Conditioning

• Vertical Transport Solution

• 600/900 rpm Conditioner Rotor

• Kverneland NonStop BreakBack System

• The mower is folded into a 125 vertical transport position using a hydraulic cylinder.

• The low gravity point during transport, with the weight of the mower close to the tractor, provides an excellent weight distribution.

• The tractor and mower remains well balanced, even during high speed road transport, and the machine is fixed during transport by the hydraulic lifting arm.

• In addition transport height is limited, so passing through narrow gateways or under bridges is not a problem.

• Another benefit is that the hydraulic cylinder also supports quick lifting of the mower from working to headland position

• The centre pivot suspension provides an even weight distribution of the 2500 H, 2836 M, 3224 MT, 3228 MT and 3132 MT and a uniform ground pressure over the complete working width, ensuring good ground contour following.

• The mowing units are suspended in the centre of gravity. This design provides a constant, faster and more precise adaptation to ground contours.

• The benefit is less skid wear, optimum protection of the stubble and less fuel consupmtion

• The machines also offer a large degree of operating adaptability, as they are factory fitted with the option of being operated with either 540 or 1000 rpm.

• It requires no additional accessory. All that is needed is simply to turn the main gearbox on the suspension 180

• To offer maximum protection of the cutterbar, these machines are fitted with the well-known Kverneland BreakBack solution.

• When encountering an obstacle, the BreakBack will swing the machine backwards and over the obstacle, returning it to the original working position once the obstacle has been passed