2026 John Deere Ag 1590 No-Till Drill 

2026 John Deere AG 1590 No-Till Drill

Air Seeding Equipment

Full Seed Ahead

When time's short and there's plenty of ground to cover, know you can seed with confidence. John Deere offers a complete line of everything you need—in the sizes you want—to seed for success. From air drills and air carts to fertilizer attachments and box drills, that all includes the precision ag technology to help you maximize your productivity so you can seed smart with accuracy you can measure.

The John Deere C-Series Air Carts

Simple. Concise. Innovative.

• Seed up to eight times1 more precisely with the new AccuRate™ stainless steel electric meters.
• Industry-exclusive EZCal™ system that saves time and steps by sending calibration numbers automatically to the cab display.
• Calibrate from the cab with ActiveCal and improve seeding confidence and productivity with tank scales.
• Fully integrated, intelligent plug-and-play seeding solution.

You wanted bigger. We delivered.

More capacity means less tendering—and less tendering means you can finish faster. That's why we're creating even bigger air carts. Like the C1100T, with a capacity of 1,100 bushels and a 105-bushel Flex Tank for even greater versatility.

EZLift System

The C1100T features an EZLift System that allows you to load bulk bags directly into tanks 1, 2, and 3. The hydraulically powered arm can lift up to 2,400 lb (1,088 kg), and a large storage platform can hold an extra bulk bag or seed pallet.

• Eliminates the need for additional tractors, picker trucks, or telehandlers in the field, reducing field logistics.
• Direct bulk bag unloading into tanks 1, 2, and 3 speeds up refilling and maximizes uptime.
• On-cart side storage platform keeps an extra bulk bag or pallet of seed within reach, ensuring uninterrupted tendering.

New 105-bu Flex Tank

A new 105-bu (3,700.1-L) Flex Tank provides space for 55 more bushels (1,938.2 more liters) than previous models, giving you more versatility in your tank mixes. Instead of using your Flex Tank for just canola or inoculant, you can fill it with extra fertilizer, wheat, and more. Lower and upper fill locations make it easy to empty bags. And a new platform – when used with the EZLift System – allows you to untie an extra seed bag between your waist and shoulder.

New 12-in (30.5-cm) Conveyor with 
Stainless Steel Hopper

We made the C1100T conveyor 17% longer, giving it a lower angle of repose for higher fill rates. And a stainless steel hopper makes it more corrosion resistant.

C-Series Tank Scales

Boost your seeding confidence with tank scales – now available on all C-Series Air Carts. Individual scales positioned on each tank tell you how many acres you have left until empty. With the G5e Cart Side Display, you can view tank scale data and pressures while you fill product. Plus, with ActiveCal, you can recalibrate any time while seeding from the cab.

RelativeFlow™ Blockage Sensors

Enjoy peace of mind knowing seed is being distributed accurately. RelativeFlow™ Blockage Sensors help ensure uniform distribution, and are now available on all air seeding tools.

• Get alerts when blockages or reductions occur.
• Avoid the hassles and costs of reseeding because of run blockages, or retaining seed and fertilizer.
• Save time by not having to leave the tractor to check for blockages.

Quick Change Blade (ProSeries™ Enhancement)

Change blades faster to save time, and reduce labor costs. Quick Change Blades are available on all no-till air seeding tools.

• Replace blades easily before, during or after seeding season.
• Reduce change time by up to 45%2.
• Minimize labor needed for manual blade changes.

TruSet™ In-Cab Downforce

Be confident in your seed and fertilizer placement as you control downforce without ever having to leave the cab. You can view and adjust downforce settings on your Generation 4 Display.

• Improve seed-to-soil contact.
• Achieve uniform emergence across varying soil conditions.
• Reduce downtime by not leaving the cab to adjust downforce manually.

Fast and Easy Calibrations

EZCal™ makes calibration fast and easy, and helps you:

• Reduce operator error and shorten the learning curve for new operators.
• Eliminate the need for calibration bags and save more than 100 walking steps.3

Plus, tank scales with ActiveCal™ allow calibration from your cab, so you can:

• Monitor individual tank weight.

Stainless Steel Electric Meters

AccuRate™ individually controlled stainless steel electric meters are corrosion-resistant, reduce maintenance costs, and provide the following benefits

• Higher-Resolution Prescriptions: Adjust the speed and volume of product at a primary level by controlling the meter, allowing up to 8x more precision.4
• Curve Compensation: Adjusts meter rates to match tool speed on the inside and outside of a turn, ensuring the applied product rate remains consistent across the tool.
• SectionCommand™ Pro: Shuts off each meter individually

ProSeries™ Opener Aftermarket Parts

Improve seed-to-soil contact, depth consistency, germination and uniform emergence with ProSeries™ Opener

Go from good to great with the ProSeries™ Opener Aftermarket Parts from John Deere. Upgrade your 90 Series Opener with six state-of-the-art parts to improve seed-to-soil contact, depth consistency, germination and uniform emergence.

Farm Even Better

Maximize the full potential of your field.

Build Your Own

Build and price seeding equipment to fit your needs.

Introducing the Tips Notebook

A compilation of tips, ideas and collective wisdom about how to get all kinds of jobs done around your place. This is where you'll find the how-do-I-do-that answers you're looking for, all in one place. It's loaded with easy-to-understand instructions, videos, and links to product information.

Compare End-Wheel Grain Drills

An easy, mid-priced way to seed into conventional tillage.
· 8 to 13 ft. (2.5 to 4.0 m) working widths
· Drill cereal grains, legumes and forage crops
· Standard hydraulic lift cylinder raises and lowers the openers
· Optional combination seed/fertilizer box available

Compare Frontier Conservation Seeders

Renovate pastures or landscape roadsides with a Conservation Seeder. It makes quick work of any type of seeding, from native prairie grasses to large legumes.
· Work at speeds up to 7 mph (11.2 kph)
· Full-width coverage to prevent "pinstripe" effect
· Reinforced nylon or cast-iron rear cultipacker rings
· Includes various combinations of standard large-grain, native grass, small-seed legume, and stainless-steel fertilizer boxes
· iMatch™ and Quick-Coupler compatible (iMatchTM compatible CS1360 only)

Compare Frontier Overseeders

Get the lush, green turf you demand with a Frontier™ Overseeder that allows placement of grass seed without reworking your lawn.
· High-precision metering seed cups
· Flow adjustment chart and lever
· iMatch™ compatible

Compare Frontier Broadcast Spreaders

Cover a lot of ground in a hurry with a Broadcast Spreader. These spreaders distribute seed, lime, or fertilizer in an area up to 49 ft. (14.9 m) wide.
· Wide variety of sizes from 3.5 to 10.6 cu. ft. (0.1 to 0.3 m3)
· Non-corrosive polyethylene seamless hopper (SS20 and SS30 Series only)
· Two pull-type models available (SS1022B and SS1035B)
· Optional weather cover and remote gate control (SS10 and SS20 Series only)

Compare Frontier Pendular Spreaders

A precision Pendular Spreader provides uniform spreading, even if materials have different weights, sizes, and textures.
· Broad range of sizes, from 9.0 to 42.4 cu. ft. (0.25 to 1.20 m3)
· Durable reinforced fiberglass hopper
· Optional hydraulic control and sand/salt spout

No-Till Drill

• Productive Seedbox capacities
• Easy-to-read seed level indicator
• Accurate fertilizer metering
• Box drill acremeter

Features may include:

ProSeries Opener enhancements

On the ProSeries Opener, the seed boots are made of the same material as the older high-wear boots previously offered, which is a highly abrasion-resistant white iron. However, this seed boot is narrower, causing less soil throw on neighboring rows. It also sits up tight to the disk blade, resulting in less wear on the boot.

Below are two diagrams showing the seed boot comparison from the 90 Series Opener (highlighted in green) to the ProSeries Opener (highlighted in red). In these diagrams, the ProSeries seed boot is narrower and sits up tighter against the disk blade.

Seed boot comparisons

• ProSeries seed boot highlighted in red
• 90 Series seed boot highlighted in green

• A is the boot comparison at a 44.5-mm (1.75-in.) depth
• B is the boot comparison at a 63.5-mm (2.50-in.) depth
• C is the ground plane

The inlet/entrance diameter is 33 mm (1.3 in.) on the 90 Series and the ProSeries. The seed tube internal diameter is 27.4 mm (1.08 in.). The cross section is larger than the inlet for the 90 Series and ProSeries.

Serrated closing wheel

Serrated closing wheel:

• The serrated closing wheel offers an improved closing system when seeding into hard soils or high residue conditions. The notches help break up the top layer of soil covering the seed trench. The notches also reach through residue to seal off the trench better, rather than simply moving residue over the trench. Consistent soil over the seed bed provides optimal germination and emergence. The serrated closing wheel has performed well in all conditions but truly shines in high residue or hard soil conditions.

Smooth closing wheel:

• The smooth closing wheel is still offered for producers who seed into loose soil conditions with little residue. The smooth closing wheel has performed well over the years and has a long-lasting service life, keeping replacement costs down.

Narrow and flexible press wheel

The narrow and flexible press wheel has improved overall seed-to-soil contact. The improvement is in the shape and diameter of the press wheel. The ProSeries Opener press wheel profiles the trench better, partly due to the narrower and more flexible wheel itself, measuring 1.8 cm x 25.4 cm (0.71 in. x 10 in.). The 90 Series press wheel is 1.9 cm x 22.9 cm (0.75 in. x 9 in.).

Growers that have consistent seed depth have a greater opportunity for uniform emergence, uniform tillering, uniform flowering, and uniform maturity. This leads to increased yield potential, easier management of crop, and typically lower harvest loss on canola.

Improved seed tab

The ProSeries Opener has an upgraded seed tab that compliments the furrow much better. This seed tab, with an angled edge that profiles the trench better, also allows for consistent seed placement due to the flexible material that was designed to make it less brittle. This also minimizes seed bouncing, which increases overall seeding accuracy.

Spoked gauge wheels

Growers have historically had to make some difficult planting and seeding decisions due to weather. Operators have been forced to plant in wet conditions that are far from optimal in order to plant within the optimum planting window. Those operators have experienced poor performance from wet soils working in between the depth gauge wheel and the opener disk and not having a way out. This creates the possibility of the depth gauge wheel or opener disk to seize up and drag through the soil.

The spoked gauge wheel is a solution for operators who plant in these conditions to allow the mud and debris that get caught behind the depth gauge wheel to easily flow through the wheel and continue providing superior depth performance.

The spoked gauge wheel is designed for optimum performance. Its features include serviceable, stamped inner and outer rims. The wheel also has cast spokes and bearing hubs for increased strength. This allows for smaller spokes, creating larger open surface area for mud and debris to flow more easily than competitor’s wheels. Another improvement over the closed gauge wheel is a snap-ring bearing retention. Simply remove the snap ring, replace the bearing, and place the snap ring back.

Narrow gauge wheels leave more stubble standing

The 76.2-mm x 406.4-mm (3-in. x 16-in.) depth gauging wheel:

• Compatible with all 90 Series and ProSeries Openers
• Provides more clearance between openers for residue flow
• Leaves more stubble standing and disturbs less residue than the 114.3-mm x 406.4-mm (4.5-in. x 16-in.) gauge wheel

Heavy trash fields from no-till environments have also tested very well with the spoked gauge wheel. Some growers provided feedback of crop residue getting inside and jamming up the gauge wheel and opener. This spoked gauge wheel has shown exceptional performance within these areas as well. These wheels are compatible with both 90 Series openers on seeding tools and planter row-units.

Below is a chart that demonstrates a competitive advantage over MudSmith™ wheels for mud and residue flow:

The wheel is serviceable along with other parts.

• AA86055 – complete wheel assembly
• A101570 – inner wheel rim half
• A101571 – outer wheel rim half

Not compatible in dual gauge wheel applications.

MudSmith is a trademark of MudSmith, LLC.

John Deere Seeding cover crop solutions

Why cover crops?

With proper management and the right selection of cover crops, you can slow soil erosion, improve soil health, enhance water availability, suppress weeds, control pests and diseases, increase biodiversity, and reap numerous other benefits for your farm’s health and profitability. Cover crops act as a protective shield for the soil, reducing the impact of heavy rains and wind, which in turn minimizes topsoil loss. They improve soil structure by adding organic matter and fostering beneficial soil microorganisms, which enhances nutrient cycling and retention.

Additionally, cover crops can break up compacted soil layers, improving root penetration and water infiltration. By suppressing weeds, they reduce the need for chemical herbicides, leading to more sustainable farming practices. Cover crops also provide beneficial habitat for insects and pollinators, boosting on-farm biodiversity. Furthermore, they can help in sequestering carbon, contributing to climate change mitigation. Overall, integrating cover crops into your farming system can lead to more resilient and productive agricultural landscapes, ultimately enhancing long-term profitability.

What tool works best for you?

The N500C model machines provide extensive crop compatibility, making them an excellent choice for customers looking to seed multiple crops and crop blends using a single tool. These machines can be customized with two unique rollers in multiple sizes to meet the specific needs of each operation. Refer to the crop compatibility link by roller below. Additionally, the N500C is capable of seeding in various soil conditions and residue types. Featuring the Pro-Series No-Till opener, it is designed to handle a wide range of conditions, from heavy residue to lightly worked soils. For more information, see the Sales Manual links below.

N500C crop compatibility

N500C model

Box Drills are an excellent choice for seeding cover crops, offering simplicity and high placement accuracy. Equipped with the Pro-Series No-Till opener, the 1590 Box Drill can handle a variety of conditions, from heavy residue to lightly worked soils. The 455 and BD11 Series Box Drills, featuring a double disk opener, are ideal for tilled seed beds. They also provide wider widths and a range of spacing options. For more information, see the Sales Manual link below.

Box Drills

Already have an Air Seeder?

Any John Deere air cart compatible tools are excellent options for seeding cover crops. Air carts come with multiple tanks, enabling you to combine or blend your cover crop mixes effectively. With a wide range of meter roller options, air carts can be easily tailored to meet your specific cover crop needs and paired with the most suitable tool for the job. For more information, see the Sales Manual links below.

Air Seeding

Air cart roller information