2023 Horsch Cruiser XL 6 XL

2023 Horsch Cruiser XL 6 XL

With its 6 bars the Cruiser mixes and distributes excellently. Due to the clearance at the tine shaft of 700 mm even large quantities of organic material are no problem. The working depth is adjusted via the support wheels at the front and the packer. The Cruiser XL is a 6-bar specialist for shallow and medium-deep tillage. The available working widths range from 5 to 7.5 metre. It is equipped with the HORSCH spring tine which rests unobtrusively in the frame and has a release force of 150 kg. The cultivator can be equipped with all four different cultivating point version and thus can be used in all seasons. The chassis of the Cruiser 5 and 6 XL is located behind the tine section, in front of the levelling tools. The chassis with its large wheels is used for road transport as well as for turning on the headlands. The 7 XL turns on the packer and thus protects the soil, as the weight of the machine is distributed over the whole width of the machine on the headlands. The sophisticated design characteristics of the chassis guarantees high ground clearance when lifted as well as a save swivelling of the tyres out of the working range when lowered. The position of the chassis has been chosen to guarantee optimum manoeuvrability in the field and high driving comfort on the road. To be able to make optimum use of the tractive output, the Cruiser XL is equipped with a fully integrated tractive power amplifier that transfers weight to the rear axle of the tractor with 1 200 kg while working. It is activated by switching the control device for lifting and lowering to a depressurised condition, without any additional control devices or cylinders.