2026 Amazone ZG-TX Special 6800 

2026 Amazone ZG-TX Special 6800

ZG-TX trailed combi spreader

AMAZONE sets new standards in the combi spreader sector with the ZG-TX. Both granular mineral fertilisers and earth-moist limes can be applied precisely through the one machine by means of a simple conversion between the TS spreading system and the newly developed spreading unit for lime. The ZG-TX subsequently combines the advantages of the precision TS spreading unit, with its disc-integrated AutoTS for optimum border spreading results, along with maximum efficiency when using lime.

Product overview

Your benefits at a glance

Flexible areas of application 
Quicker and easier conversion between lime and fertiliser spreading
Precise spread patterns Outstanding lateral distribution for fertiliser and lime thanks to the tried-and-tested TS spreading system and the newly developed spreading unit for lime 
High-performance Maximum capacity for larger working widths 

Exact spread rate regulation in any field situation 
FlowControl guarantees precise application rates from the first second irrespective of the side 

Uniform crops on the headland 
HeadlandControl ensures perfect lateral distribution through wider spreading at the headland and parabolic switching of the part-width sections
    
Perfect border spreading 
AutoTS for fertiliser: proven precision, maximum yield right up to the field boundary  Border spread deflector for lime: precise working at the edge of the field.

The right machine for every application

A wide variety of equipment options

The various equipment levels available for the ZG-TX can be specifically tailored to the respective application on large-scale farms, with contractors or in machinery hire businesses. As a result, everything is possible with simple to fully equipped models from AMAZONE. In particular, the ZG-TX Super is sure to impress with maximum load capability on only one axle thanks to the reinforced components in comparison with the Special. With a maximum permissible machine weight of up to 21 t, the spreader offers high performance for any farm.

Special and Super – Frames for all requirements

Make the choice that suits your operation! 
The drawbar on the Special frame has a technically permissible drawbar load of 2.5 t. Either top or a bottom hitch mounting with a K80 ball or a drawbar eye D40 can be specified here.

The drawbar for the Super frame is designed exclusively for a lower hitch drawbar. Combined with a K80 ball coupling with a technically permissible drawbar load of 6 t and a technically permissible axle load of 15 t on the ZG-TX Super, the implement offers a significantly higher payload.

Everything flows smoothly thanks to the optimum hopper shape

Thanks to the sophisticated hopper shape of the ZG-TX, it has an optimum centre of gravity which significantly counteracts any negative support loads. The steep hopper walls, without corners or edges, ensure an optimum flow of material, even with earth-moist lime. The maintenance-free floor belt with automatic centring along the bottom of the hopper ensures reliable metering. The roll-over cover leaves the hopper access almost completely open, making loading as easy as possible.

Optimum load distribution

The floor belt rises by 5 degrees which enables a weight transfer from the back to the front. This guarantees optimum load distribution during spreading. Maximum drawbar load and reduced axle loads enable safe driving in the field under all operating conditions.

Benefits of the hopper design

• Optimum flow of the application material, even on slopes
• Easy cleaning
• Favourable centre of gravity to avoid negative support loads

Easily manoeuvrable and comfortable – Perfect driving behaviour on the road and in the field

Greater comfort – gentle on the crop

• Track widths from 1.80 to 2.25 m 
• Increased driving comfort due to the spring-suspended drawbar systems 
• Rigid and robust chassis technology 
• Dual-circuit air braking system with 40 km/h approval  
• Large contact area with implement wheels with a width of up to 750 mm 
• AS wheels with a height of up to 2.05 m provide maximum crop clearance

Robust axle steering

The ZG-TX trailed spreaders, equipped with the optional steering axle, provides a maximum steering angle of up to 20°. As a result, crop-friendly track-following is possible, depending on the track width. The automatic steering even allows counter-steering on slopes. As soon as the spreading disc drive has been deactivated and a speed of 15 km/h is exceeded, the steering automatically stops to ensure the safe road transport at speeds of up to 40 km/h.

Benefits of axle steering 

• Steering angle up to 20° 
• Safe working on slopes 
• Crop is protected due to true track-following

Double benefit – lime and fertiliser distributed to perfection

The special feature of the ZG-TX is the simple changeover between the lime spreading unit and the TS spreading unit for granular mineral fertilisers. Just the individual components need to be changed or moved to the park position. Thanks to the clever software, the terminal recognises that the spreader has been converted. The combi spreader is converted completely in around 25 minutes enabling either lime or fertiliser then to be spread. The benefits of both systems are used after changing over.

Only 4 components have to be changed in this intuitive conversion: 

• Scatter guard
• Spreading discs
• Funnel chute
• Filling sieves

The benefits: 

• Quick changeover of fewer components 
• Intuitive software support 
• No technological compromises in the spreading unit 
• Flexible use ensures economic utilisation